Author Topic: Milestone XProtect  (Read 246 times)

0 Members and 1 Guest are viewing this topic.

support

  • Administrator
  • Full Member
  • *****
  • Posts: 38
    • View Profile
    • pc-cctv.com
Milestone XProtect
« on: June 14, 2017, 17:36:59 »
1. How to add PC-CCTV to Milestone XProtect

Open XProtect Management Client. Select server and add new hardware. Choose the manual method.

« Last Edit: June 14, 2017, 18:13:44 by support »

support

  • Administrator
  • Full Member
  • *****
  • Posts: 38
    • View Profile
    • pc-cctv.com
2. How to add PC-CCTV to Milestone XProtect
« Reply #1 on: June 14, 2017, 17:42:42 »
Enter the user and password, the same values as in the PC-CCTV program (PC-CCTV Menu Settings/Users).
« Last Edit: June 14, 2017, 18:13:51 by support »

support

  • Administrator
  • Full Member
  • *****
  • Posts: 38
    • View Profile
    • pc-cctv.com
3. How to add PC-CCTV to Milestone XProtect
« Reply #2 on: June 14, 2017, 17:47:50 »
Select ONVIF driver
« Last Edit: June 14, 2017, 18:14:01 by support »

support

  • Administrator
  • Full Member
  • *****
  • Posts: 38
    • View Profile
    • pc-cctv.com
4. How to add PC-CCTV to Milestone XProtect
« Reply #3 on: June 14, 2017, 17:56:02 »
Define IP address and port for access to PC-CCTV through ONVIF. Right click PC-CCTV tray icon, open "Settings" menu, select "Access URLs" tab.
Choose one of the IP-addresses to access the PC-CCTV. If the port in the URL is not specified, it means that port has value 80.

You can set the port for ONVIF in the "Settings/Network" tab.
« Last Edit: June 14, 2017, 18:15:38 by support »

support

  • Administrator
  • Full Member
  • *****
  • Posts: 38
    • View Profile
    • pc-cctv.com
5. How to add PC-CCTV to Milestone XProtect
« Reply #4 on: June 14, 2017, 17:59:35 »
In mailstone software, set the IP-address and port.
« Last Edit: June 14, 2017, 18:14:16 by support »

support

  • Administrator
  • Full Member
  • *****
  • Posts: 38
    • View Profile
    • pc-cctv.com
6. How to add PC-CCTV to Milestone XProtect s
« Reply #5 on: June 14, 2017, 18:02:17 »
The PC-CCTV program should be detected.

support

  • Administrator
  • Full Member
  • *****
  • Posts: 38
    • View Profile
    • pc-cctv.com
7. How to add PC-CCTV to Milestone XProtect
« Reply #6 on: June 14, 2017, 18:04:32 »
Select Devices/Cameras and setup the stream.
« Last Edit: June 14, 2017, 18:14:24 by support »

support

  • Administrator
  • Full Member
  • *****
  • Posts: 38
    • View Profile
    • pc-cctv.com
8. How to add PC-CCTV to Milestone XProtect
« Reply #7 on: June 14, 2017, 18:08:19 »
Open Milestone XProtect s Smart Client and add camera(PC-CCTV) to View.
« Last Edit: June 14, 2017, 18:14:31 by support »