Author Topic: HIKvision  (Read 6198 times)

0 Members and 3 Guests are viewing this topic.

support

  • Administrator
  • Full Member
  • *****
  • Posts: 45
    • View Profile
    • pc-cctv.com
HIKvision
« on: February 18, 2017, 10:25:21 »
HIKvision NVR setting

1) Select protocol ONVIF
2) See ONVIF Access URL from PC-CCTV "Settings/Access URLs" tab.
For example:

ONVIF URLs :
http://192.168.0.98:8081/onvif/device_service

3) Enter port to the NVR
The example value is 8081
If port is not specified then enter value 80

4) Enter IP-address to the NVR
The example value is 192.168.0.98:8081

5) In PC-CCTV program add user and password (see build in Help), then enter this values to NVR
6)  Set streaming protocol to "Auto"

Enjoy!

If steel not work use Settings/Support tab.
« Last Edit: February 18, 2017, 10:28:04 by support »